Disc Spring Hanger Assemblies

Sneha make Disc Spring Hanger Assemblies are designed to hang the vessels which are subjected to vertical movement due to change in temperature etc. Variable spring hanger provide continuous support for the vessel in all positions permitting their vertical movement.

PProtection : :

Pre Compression :

The disc springs are pre-compressed into the hanger casting. This leads to following advantages,
• Saves up to 50% in the head room by reducing the hanger length.
• Reduces the installed height of overall hanger assembly.
• Prevents the spring supporting force from exceeding the normal safe limits of variation.
• Saves erection time because spring is pre-compressed to the working range.

Protection :

• Metallic cover is provided to protect from ingress of dirt, dust etc. into the assembly before installation.
• For corrosive applications all parts except spring are electro - galvanized and / or coated with epoxy paint.
Graphite grease is applied on spring

Structural Bearings I Rotary Air Lock Valves I Pot & Pot PTFE Bearings I PTFE Rocker Cum Sliding Bearings I Plate Type Sliding Bearings I Spherical PTFE Sliding Bearings I Exposed Dowel Type Bearings I Duct Support Bearings I Bridge Bearings I Plain Sliding Bearings I Plough for Sugar Centrifuges I Rotary Valve and Rotary Feeder I Disc Spring Hanger Assemblies I Home I Profile I Bearings Applications I Quality Policy I CRISIL Ratings Certificate NSIC I ISO Certificate I Sitemap I Contact us I Feedback